2198.42. Ball bearing rail
Note:
The ball bearing rails are pushed into the DIN 650 T-shaped grooves in the press table and are fixed in place by the clamping piece. The size and number of the ball bearing rails is determined by the size of the T-shaped groove and the load-bearing capacity required. Once the tool is clamped in place, it lies on the press table and the clamping pressure presses the ball bearings into the holes.
* T-shaped grooves are not absolutely necessary.
The ball bearing rails are pushed into the DIN 650 T-shaped grooves in the press table and are fixed in place by the clamping piece. The size and number of the ball bearing rails is determined by the size of the T-shaped groove and the load-bearing capacity required. Once the tool is clamped in place, it lies on the press table and the clamping pressure presses the ball bearings into the holes.
* T-shaped grooves are not absolutely necessary.
Log in to view price, availability, and order the product.
Products
Showing 1-10 of 24 items
| SKU | Width | Length | |
|---|---|---|---|
| 2198.42.18.105 | 18 mm | 105 mm | |
| 2198.42.18.140 | 18 mm | 140 mm | |
| 2198.42.18.175 | 18 mm | 175 mm | |
| 2198.42.18.210 | 18 mm | 210 mm | |
| 2198.42.18.280 | 18 mm | 280 mm | |
| 2198.42.18.350 | 18 mm | 350 mm | |
| 2198.42.22.120 | 22 mm | 120 mm | |
| 2198.42.22.160 | 22 mm | 160 mm | |
| 2198.42.22.200 | 22 mm | 200 mm | |
| 2198.42.22.240 | 22 mm | 240 mm | |
| 2198.42.22.320 | 22 mm | 320 mm | |
| 2198.42.22.400 | 22 mm | 400 mm | |
| 2198.42.28.135 | 28 mm | 135 mm | |
| 2198.42.28.180 | 28 mm | 180 mm | |
| 2198.42.28.225 | 28 mm | 225 mm | |
| 2198.42.28.270 | 28 mm | 270 mm | |
| 2198.42.28.360 | 28 mm | 360 mm | |
| 2198.42.28.450 | 28 mm | 450 mm | |
| 2198.42.36.150 | 36 mm | 150 mm | |
| 2198.42.36.200 | 36 mm | 200 mm | |
| 2198.42.36.250 | 36 mm | 250 mm | |
| 2198.42.36.300 | 36 mm | 300 mm | |
| 2198.42.36.400 | 36 mm | 400 mm | |
| 2198.42.36.500 | 36 mm | 500 mm |